RTB AR15 Lightweight Carrier - Nickel Boron NiB (carrier only)
Featuring our NiB coated Right To Bear Lightweight carrier, weighing in at approximately 6.8 Ounces, or 194.1 Grams for you lightweight build fanatics! Using our low mass Carrier creates less reciprocating mass moving back and forth inside the action, which reduces recoil significantly. Our lightweight carrier also allows proper cycling with less gas. When used in conjunction with an adjustable gas block & reduced power buffer spring, you can tune the gas way down, which will reduce muzzle rise and carbon build up.
The increased lubricity from the Nickel Boron process allows you to take full advantage of its lightweight profile. The slick surface combined with our lightweight carrier, creates very little resistance and allows the rifle to cycle smoother and increases reliability.
These faceted AR15 carriers can be used to build any small frame AR caliber complete BCG. Just add a caliber bolt of your choice. You can pair these carriers with the bolt completion kits below to assemble a complete BCG.
5.56 Bolt Completion Kit
7.62x39 Bolt Completion Kit
6.8 SPC Bolt Completion Kit
.458 SOCOM Bolt Completion Kit
6.5 Grendel Bolt Completion Kit
Click here for the reduced power buffer spring
Click here for the adjustable gas blocks
- Nickel Boron Finish for superior lubricity
- Weight: 6.8 Ounces / 194.1 Grams!
- 8620 Tool Steel (Carrier)
- Mil-Spec Gas Key (4130 Steel) attached with Grade 8 hardware and Properly staked
- Lifetime Warranty (you break it, we replace it)