Home > Buffer Tube Parts & Kits >

RTB AR15/M4 REDUCED POWER Carbine Buffer Spring - RP Yellow

RTB AR15/M4 REDUCED POWER Carbine Buffer Spring - RP Yellow


 
MSRP $20.00
SALE PRICE: $15.95
Savings: $4.05
 

Stock Status :IN STOCK
Product Code: 877-RP-Y
Qty:

Description
 

AR15 / M4 Reduced Power Carbine Buffer Spring - Yellow

RTB Reduced power carbine buffer spring has roughly 25% less spring tension than your standard buffer spring. This low powered buffer spring is ideal when used in conjunction with a lightweight carrier and/or an adjustable gas block to minimize recoil.

By reducing the weight of your action with lightweight parts and reducing the amount of spring tension, you can tune the gas block way down, which almost completely eliminates recoil! An easy way to think of it is (less mass reciprocating at a lower speed inside of your rifle). This buffer spring can also help under gassed AR15 rifles cycle properly and aid in last round bolt hold open.

Click here for lightweight carriers
Click here for adjustable gas blocks

Features:

  • Reduced Power Carbine Buffer Spring (25% reduced tension)
  • ASTM Grade A877 Certified Valve Quality Chrome Silicon Wirestock
  • Heat Treated, Stress Relieved and Dual Stage Shot-Peened post winding (Our springs really ARE shot-peened)
  • Impregnation / Plating with Re-Micronized Molybdenum Disulfide formulation

Average Rating: 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
Great price July 11, 2019
Reviewer: Anonymous Person from KY United States  
Great price shipped fast what not to like? 👍

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent results June 23, 2019
Reviewer: Don MacArthur from Palouse, WA United States  
I have a PSA 16" freedom rifle, mid-length gas system, full auto BCG, 1/7 twist barrel, carbine buffer tube and spring that was showing signs of being under-gassed. Bolt would not hold open on last round, spent casing ejected at around 5 o'clock, failure to pickup next round, etc. The reduced power carbine buffer spring solved all of these problems. It now ejects spent casings at around 330 to 4 o'clock, stays open after last round is fired, and cycles each and every round flawlessly.  Additionally, the item was shipped fast and was easy to install.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
My AR is finely tuned now June 14, 2019
Reviewer: Christopher S Foster from ruth, NV United States  
I'm running this spring with a 24 inch barrel, rifle gas system, full mass M16 bcg, with a carbine lower and a 3oz buffer. I am running all new parts on my build, but was having minor short stroking issues. With no leak or friction issues. The gas block is perfectly aligned. Not only did this spring solve my issues, and ejects brass at the 430 position all day long. My rifle has 0 recoil,and 0 muzzle jump. The crosshairs stay on target and thr rifle runs smooth.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
As advertised March 4, 2019
Reviewer: Anonymous Person from Yucaipa, CA United States  
I'm using this in conjunction with a lightweight bolt carrier group with a standard carbine buffer and midlength gas system and it works flawlessly.  I have the mft muzzle break and there is virtually zero recoil,  which was the goal for my match AR build.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Works great with lightweight BCG & FAST SHIPPING November 12, 2018
Reviewer: Brian from Richmond, VA United States  
I ordered two of these because my Brownells LW BCG's were cycling forward too fast to catch the bolt release and in some cases outrunning the mag causing feeding issues. This simple solution fixed everything! Ordered on Wednesday, received them on Friday! I'll definitely be ordering from you guys again!

Was this review helpful to you?