Home > Brands > Kaw Valley Precision >

Kaw Valley 17.4 SS AR-15 Reduced Power Trigger Spring Kit

Kaw Valley 17.4 SS AR-15 Reduced Power Trigger Spring Kit


 
MSRP $9.95
SALE PRICE: $6.95
Savings: $3.00
 

Stock Status :IN STOCK
Product Code: KVP-RPTK
Qty:

Description
 

Kaw Valley 17.4 SS AR-15 Reduced Power Trigger Spring Kit

Mil-spec AR-15 triggers typically have an 8 to 9 pound trigger pull with factory springs. Utilizing the KVP Reduced Power Spring Kit should achieve a trigger pull reduction of 2 to 4 pounds. A 5 to 6 pound trigger pull is typical after installation of the KVP Reduced Power Spring Kit.

The KVP reduced power springs are designed to reduce trigger pull weight in Single Stage triggers. Due to the magnitude of triggers on the market, KVP can not guarantee that ALL triggers will adequately detonate ALL cartridges. We recommend high quality brass cased ammunition loaded with commercial primers for the best results. Installation should be performed or overseen by a competent gunsmith.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 11 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 It works October 28, 2019
Reviewer: the IVANATOR from BEAVERTON, OR United States  
Paired with RTB plated trigger; light smooth and crisp. Fired 200+ with no malfunction, including some Tula steel case.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Highly recommend for mil spec trigger October 25, 2019
Reviewer: David McGrath from CHARLEROI, PA United States  
Works great. Got my mil spec trigger down to 3 1/2 lb. No light hammer strikes with various ammo. All rounds go off as they should.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Better mil-spec trigger. March 4, 2019
Reviewer: KB from Saratoga Springs , NY United States  
Installed the Kaw Valley Reduced Power Trigger Spring Kit in an Aero Lower with RRA trigger, hammer and sear.  Springs reduced pull from a measured 6.5 lbs to 4.5 lbs.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good Springs February 11, 2018
Reviewer: Anonymous Person from Iowa Falls, IA United States  
These springs were the finishing touch to a trigger job on an AR I was upgrading for a friend. After Stoning and polishing the sear and hammer I added the springs for a final pull of 3.25lb with a clean crisp break. Very nice and the shipping was pretty quick.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Simple upgrade!! August 22, 2017
Reviewer: Shaun Patterson from Brookfield , WI United States  
One of the easiest and cheaper upgrade to a stock setup available!

Was this review helpful to you?

View All Customer Reviews