Two-Piece 16″ 5.56 Carbine Build Kit | 15″ Quad Rail M-LOK | $400
Build smart with our $400 Two-Piece Build Kit concept: a fully assembled upper receiver paired with a fully assembled Andro Corp ACI-15 complete lower (no stock). Both components ship in the same box but are not attached to each other. If you add an optional stock, it will ship unattached and will not be installed on the lower. This lets you complete the final assembly your way while keeping packaging simple and compliant.
- What’s included: (1) complete upper + (1) complete Andro Corp ACI-15 lower (no stock).
- Assembly status: Upper ships fully assembled. Lower ships fully assembled. They are not assembled together in the box.
- Optional stock: If selected, the stock ships unattached and will not be mounted on the lower.
Builder's Grade Complete 16" 5.56 Upper Receiver | A2 | 15" Quad M-LOK | With Bolt Carrier Group and Charging Handle
The Complete 16 inch M-LOK upper receiver comes with a 15 inch quad free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean.
|
Barrel
|
Specifications
|
|---|---|
| Caliber | 5.56 |
| Length | 16" |
| Material | 4150 Chrome Moly Vanadium |
| Profile | Government |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | MidLength |
| Gas Block Journal | .750" |
| Dimpled? | No |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2x28 TPI |
| Weight | 27.2oz |
| Barrel Extension | M4 Feed Ramps |
| Target Crown | 11 Degree |
Bolt Carrier Group:
- Enhanced 9310 Steel (Bolt)
- 8620 Tool Steel (Carrier)
- Bolt is shot Peened and MPI
- All BCG components are pre-polished before being processed and then post polished for an incredible shine
Upper Receiver:
- Machined from a Mil-Spec 7075 T6 forging Hard Coat Anodized per Mil-A-8625F, Type III
- M4 Feed ramps
- Made in the U.S.A.
Handguard:
- 15" free float handguard
- MIL-STD 1913 Picatinny rail on top
- 4 M-Lok slots on 4 sides
- Precision Machined aircraft grade aluminum, for high strength and weight savings
- Clamp on system for easy assembly
- Steel Barrel nut to resist movement under heat
- Made in USA
Charging Handle:
- Alloy Charging Handle Assembly
- Complete with Standard Latch
- Made from hardcoat anodized aluminum
- Black finish
Andro Corp ACI-15 | AR-15 Complete Lower Receiver | No Stock
The Andro Corp ACI-15 Complete Lower Receiver (No Stock) is a ready-to-build foundation for your next AR-15. Built on a 7075-T6 forged lower and finished with a MIL-SPEC lower parts kit, this complete lower includes an A2 pistol grip and a MIL-SPEC buffer tube assembly—so you can add your preferred carbine stock and hit the range. Caliber: Multi for compatibility with standard AR-15 uppers (5.56/.223, .300 BLK, etc.).
- Receiver: 7075-T6 forged, hard-use ready
- Caliber: Multi (AR-15 pattern)
- Lower Parts Kit: MIL-SPEC, installed
- Grip: A2 pistol grip
- Buffer System: MIL-SPEC buffer tube assembly installed (no stock included)
Shipping note: This lower ships fully assembled. If you select an optional stock, the stock will ship unattached and will not be mounted on the lower. The upper and lower will not be assembled together in the box.
Please Note: Uppers may present light fouling from our quality control process and/or test firing
***Please allow an additional 2-3 business days of lead time as these uppers are made to order.***
Before ordering, confirm your chosen FFL will complete the transfer and all required steps (background check, paperwork, fees, and any local requirements). Right To Bear does not process these steps.
All federal, state, and local laws apply. Review our policy: RTB Shipping Restrictions.
