Right To Bear 14.7" Pencil Profile Barrel 5.56 (MidLength)
This 5.56 chambered 14.7" Pencil Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.
Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. The technique is used when two or more of the following properties are required in a work piece:
Barrel | Specifications |
---|---|
Caliber | 5.56 |
Length | 14.7" |
Material | 4150 Chrome Moly Vanadium |
Profile | Pencil |
Finish | QPQ Corrosion Resistant |
Gas System Length | Mid |
Gas Block Journal | .625 |
Dimpled? | No |
Twist Rate | 1:7 |
Muzzle Thread | 1/2x28 TPI |
Weight | 21oz |
Barrel Extension | M4 Feed Ramps |
Target Crown | 11 Degree |
All NFA/ATF Rules Apply
Depending on your state and local laws, you could use this barrel with a lower receiver that is a Registered SBR, or Pistol. Possession of this barrel along with a Non-NFA lower receiver may be Prohibited. We are not lawyers and the above information is not legal advise. Make sure you understand the most up to date federal, state and local laws before proceeding with this product.