Home > 80% Lower Receivers >

Tactical Machining Govt 80% 1911 Frame
Tactical Machining Govt 80% 1911 Frame

MSRP $169.00
SALE PRICE: $109.99
Savings: $59.01

Stock Status :IN STOCK
Product Code: GOV-1911


Tactical Machining Govt 80% 1911 Frame

80% TM GOVT 1911 frames are CNC machined from an investment casting of 4140 ordnance grade steel. The operations left to be completed are slide rails, hammer and sear pin holes, and barrel seat. This is a not an FFL item. This is not a complete frame and still requires machining to be done. up to date. We cannot and will not provide any legal advice as we are not lawyers.

Please note: Some states may not allow you to legally manufacture a firearm without a serial number (like the state of NJ). Please be sure to do your due diligence and make sure you are following your state and local laws before attempting to manufacture a firearm. This is not intended and should not be construed as an advertisement or offer for sale of any of our products to New Jersey residents or any person in New Jersey.

Average Rating: 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
1911 frame March 4, 2019
Reviewer: william reed from canonsburg, PA United States  
very pleased with right to bear arms and tactical machining i had a problem with a 80% frame i purchased from right to bear arms the problem was quickly turned over to tactical machining witch was resolved very quickly. thanks to everyone

Was this review helpful to you?

  2 of 2 people found the following review helpful:
Tactical machining 1911 December 14, 2018
Reviewer: Matt from Wisconsin  
Everything on this frame is tight fitting, have spent many hours on the completion process. During completion, I noticed that the frame came with mainspring housing hole not drilled. Contacted manufacturer due to right to bears policy on 80% lowers, not only did the manufacturer take care of the issue by sending a replacement frame they did not ask me to chop and send the other frame to them. This frame is a good deal for a novice gun smith. I would not recommend it to some one who has zero experience in metal work or gunsmithing.

Was this review helpful to you?