12.5" 5.56mm, Carbine, 1:7, GOV
Hammer Forging of barrels has been known for decades to produce the most
accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of
barrels is accomplished through intense hydraulic pressure applied at opposing
angles by carbide steel hammers. During the hammering process, a mandrel is
inserted into the bore while the carbide steel hammers shape the barrel around
the mandrel creating the chamber, the lands, and the grooves. In addition to
the aforementioned benefits, the Cold Hammer Forging process creates a defect
free bore and the most consistent chamber possible.
Daniel Defense cold hammer forged barrels are made from start to
finish in our state-of-the-art facility located in Black Creek, GA. In keeping
with our heritage of not cutting corners, all cold hammer
forged barrels feature a forged chamber and heavy phosphate exterior
coating or Salt Bath Nitride Finish. These barrels will prove themselves to be
more accurate and last longer than a barrel that has cut or button rifling.
Once this part is assembled into a
complete firearm, it becomes a regulated item by the National Firearms Act
(NFA). Please check with your local and state municipalities for any further
regulatory requirements. It is the buyer’s responsibility to make sure they
comply with all NFA rules and applicable laws.
All Daniel Defense products carry
a 100% satisfaction guarantee against defects in original materials and
workmanship. If your Daniel Defense product shows evidence of such
defects, Daniel Defense will make every accommodation to fix, repair, or
replace your product in the most expeditious manner possible. Daniel
Defense does not warranty products or damage caused to our products by the
correct or incorrect installation of other manufacturer’s products. Be sure to
retain your sales slip as proof of purchase date when making a claim.